Directional Control Valves I

Features

LS-G02 is a solenoid valve with low-wattage type coil (DC:5W or AC:12W). Low current requirement for the valve allow it to be driven directly from a programmable sequence controller.

• Electronic catalog  (759KB)

• Sectional view/sealing parts  (218KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

• Forward/backward compatibility  (208KB)

Features

LS-G03 is a solenoid valve with low-wattage type coil (DC:5W or AC:12W). Low current requirement for the valve allow it to be driven directly from a programmable sequence controller.

• Electronic catalog  (625KB)

• Sectional view/sealing parts  (401KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Realize high-pressure large-flow-rate control at 35 MPa and 100 L (G02) or 160 L/min (G03). Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade.

• Electronic catalog  (1623KB)

• Sectional view/sealing parts  (212KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

• Forward/backward compatibility  (208KB)

Features

Enables 2-speed control (acceleration/deceleration control) of an actuator by switching the pilot solenoid valve.

• Electronic catalog  (366KB)

• Sectional view/sealing parts  (191KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

The capability to switch the valve with a minute signal current (approximately 10 mA) enables direct drive from a programmable sequence controller.

• Electronic catalog  (344KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Compound valves incorporating the functions of a differential circuit, counter balance valve and a throttle valve, along with a decompression function, make it easy to construct a hydraulic press circuit.

• Electronic catalog  (440KB)

• Sectional view/sealing parts  (226KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

No hydraulic locking occurs even during long periods of pressurized operation.

• Electronic catalog  (437KB)

• Sectional view/sealing parts  (173KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Adoption of the shockless spool enables smooth reversal and stopping of the load. Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade.

• Electronic catalog  (530KB)

• Sectional view/sealing parts  (174KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm²} and 300 L/min. Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade. Models equipped with a built-in check valve for pilot pressure are also available.

• Electronic catalog  (575KB)

• Sectional view/sealing parts  (194KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm²} and 700 L/min.

• Electronic catalog  (486KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Realize high-pressure large-flow-rate control at 35 MPa {350 kgf/cm²} and 700 L/min.

• Electronic catalog  (464KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

The highly reliable KSO－G02 adopted as the pilot valve ensures long service life and stable operation. Best suited to integration into European Safety Standard (CE) compliant equipment because of dust-/water-proof properties that satisfy the IEC Pub529 IP65 ingress protection grade.

• Electronic catalog  (548KB)

• Sectional view/sealing parts  (150KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Using these valves in combination with a pressure compensation valve (MUV, MDM) achieves flow rate characteristics with pressure compensation according to the adjustment made with the flow rate adjusting screw.

• Electronic catalog  (594KB)

• Sectional view/sealing parts  (135KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

JP valve enables switching of the direction of flow of the fluid by operating the spool with the hydraulic pilot valve.

• Electronic catalog  (588KB)

• Sectional view/sealing parts  (262KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

No hydraulic locking occurs even during long periods of pressurized operation.

• Electronic catalog  (441KB)

• Sectional view/sealing parts  (254KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

DM04 valve enables switching of the direction of flow of the fluid by operating the spool with the manual operation lever. The handle can be operated easily even at a high pressure.

• Electronic catalog  (441KB)

• Sectional view/sealing parts  (234KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

JM valve enables switching of the direction of flow of the fluid by operating the spool with the manual operation lever. Enables construction of a wide variety of circuits in combination with 02 size stack valves.

• Electronic catalog  (375KB)

• Sectional view/sealing parts  (258KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Compact directional control valves using a rotary spool available in two models, one dedicated to manual operation and the other with a dog for cam operation (manual operation also possible). The structure has a high level of pressure balance, which suppresses the variation in the force required to operate the handle according to the pressure change.

• Electronic catalog  (360KB)

• Sectional view/sealing parts  (267KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

Enables acceleration/deceleration of a cylinder by adjusting the plunger stroke with a cam mechanism.

• Electronic catalog  (354KB)

• Sectional view/sealing parts  (159KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)

Features

DD2 is a 2-position, 2-way valve which enables switching of the fluid passage in a hydraulic pilot circuit or interlocking circuit using cam operation. Compact and lightweight designs are ideal for automatic operation.

• Electronic catalog  (346KB)

• Sectional view/sealing parts  (250KB)

Notes on using the products

• Directional control valves Ⅰ (157KB)